ConnectionSettings Properties |
The ConnectionSettings type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | AutoReconnect |
Gets or sets a value that indicates whether auto reconnect is enabled.
|
| ClearScreenOnDisconnect |
Gets or sets a value that indicates whether to clear the screen buffer on session disconnect.
|
| Columns |
Gets or sets the number of screen columns (VT/SCOANSI/WYSE).
|
| ConnectMethod |
Gets or sets the connection method (TN3270/TN5250).
|
| ContentionResolution |
Gets or sets a value that indicates whether contention resolution is enabled (TN3270).
|
| CustomCols |
Gets or sets the number of screen columns for dynamic model (TN3270/TN5250).
|
| CustomRows |
Gets or sets the number of screen rows for dynamic model (TN3270/TN5250).
|
| DataBits |
Gets or set the number of bits used for each character (SCOANSI/WYSE).
|
| Encryption |
Gets or sets the encryption for the connection.
|
| EnhancedMode |
Gets or sets a value that indicates whether enhanced mode is enabled (TN3270/TN5250).
|
| ExtAttributes |
Gets or sets a value that indicates whether extended attributes is enabled (TN3270).
|
| HllapiAutoSelect |
Gets or sets a value that indicates whether automatic HLLAPI name selection is enabled.
|
| HllapiLongName |
Gets or sets the HLLAPI long name when automatic selection is disabled.
|
| HllapiShortName |
Gets or sets the HLLAPI short name when automatic selection is disabled.
|
| HostCodePageEnum |
Gets or sets the host code page (TN3270/TN5250).
|
| HostList |
Gets or sets the list of alternate IP host names and ports to be used when connection from the primary setting fails.
|
| HostNameIP |
Gets or sets the host name or IP address.
|
| HostType |
Gets or sets the host emulation type.
|
| KeepAliveSeq |
Gets or sets the keep alive sequence.
|
| KeepAliveTimeoutMin |
Gets or sets the interval in minutes at which the keep alive sequence is sent.
|
| Lines |
Gets or sets the number of screen lines (VT/SCOANSI/WYSE).
|
| Model |
Gets or sets the screen model (TN3270/TN5250).
|
| NameOverride |
Gets or sets a value that overrides the device type string that is automatically
generated by the screen size and extended attribute settings.
|
| NonSNAChainCommand |
Gets or sets a value that indicates whether non-SNA command chaining is enabled.
|
| OperatingMode |
Gets or sets the VT operating mode (VT).
|
| Port |
Gets or sets the host port number.
|
| ResourceName |
Gets or sets the resource name (TN3270/TN5250).
|
| ResponseSupport |
Gets or sets a value that indicates whether response support is enabled (TN3270).
|
| ScrollBackBufferSize |
Gets or sets the size of the screen history log in number of lines.
|
| SessType |
Gets or sets the session type.
|
| SshCompressionLevel |
Gets or sets the SSH compression level.
|
| SshEncryptionAlgorithms |
Gets or sets the SSH allowed encryption algorithms.
|
| SshHostKeyAlgorithms |
Gets or sets the SSH allowed host key (server key) algorithms.
|
| SshKeyExchangeAlgorithms |
Gets or sets the SSH allowed key exchange algorithms.
|
| SshMacAlgorithms |
Gets or sets the SSH allowed message authentication code algorithms.
|
| SshMinimumDiffieHellmanKeySize |
Gets or sets the SSH minimum allowed size of the ephemeral Diffie-Hellman prime.
|
| SshMinimumRsaKeySize |
Gets or sets the SSH minimum allowed size of the RSA key.
|
| SshPasswordPlain |
Gets or sets the SSH password value in plain text.
|
| SshPrivateKeyFile |
Gets or sets the SSH private key file.
|
| SshPrivateKeyPasswordPlain |
Gets or sets the password for the SSH private key in plain text.
|
| SshPromptFingerprint |
Gets or sets a value that indicates whether to display a dialog containing
host key fingerprint for host identity confirmation.
|
| SshUsername |
Gets or sets the username to log in to the SSH server.
|
| SSLClientCert |
Gets or sets the SSL certificate for client authentication.
|
| SSLFlags |
Gets or sets the server certificate exception(s) that are accepted.
|
| SSLNotAcceptAction |
Gets or sets the action to take when server certificate is not accepted.
|
| SSLProtocol |
Gets or sets the SSL/TLS protocol.
|
| TerminalID |
Gets or sets the terminal ID (VT/SCOANSI/WYSE).
|
| TimeOutSec |
Gets or sets the time out value in seconds.
|
| VtHostEncoding |
Gets or sets the host encoding (VT/SCOANSI).
|
| VtNRCharset |
Gets or sets the national replacement character set (VT/SCOANSI/WYSE).
|
| WyseCharset |
Gets or set the user-preferred character set (WYSE).
|
See Also